Product overview:
WQ300M5805 is a long-distance 5.8G wireless transmission equipment launched by our company. It uses wireless communication technology and uses air as the medium for network data transmission, long-distance point-to-point or point-to-multipoint interconnection, and the working data link layer is implemented The interconnection of local area networks can achieve a transmission distance of up to 5km.
Product features:
■ A, B for automatic network formation
A, B automatic networking, support one-to-one, one-to-many, no additional Settings, A, B flexible switching. WDS networking mode, video network dual compatibility.
■ Automatic power adjustment
Power automatic adjustment, adapt to the environment changes, to ensure that both super close to ensure smooth video.
■ Video transmission protocol
The wireless video surveillance transmission has been optimized in depth to ensure dynamic burst, ensure high-speed video transmission, and achieve smooth video surveillance and keep it off without card. At the same time, the underlying wireless drive is deeply optimized, with stronger anti-interference ability and better stability.
■ Economic and environmental protection
In public places, electric power, telecommunications, ports, oil fields and other departments, when building proprietary wired networks, they are often restricted by special geographical environments such as mountains and open areas and complex operation content, resulting in a long wiring project cycle or even failure at all. Difficulties in implementation. With the development of science and technology, advanced computer multimedia and network technology have given the video surveillance system richer functions and more reliable quality. The use of wireless video, audio, and data transmission equipment can get rid of the shackles of cables, highlighting the short installation cycle, It has the advantages of easy maintenance, strong expansion capability, and rapid cost recovery. Especially with the rapid development of wireless LAN technology based on spread spectrum technology, the bottleneck of transmission capacity has been broken through, allowing the integrated application of video, audio, and data wireless transmission to be further developed.
■ Energy conservation and environment protection
It adopts low power consumption and high performance design, and its radio frequency indicators and radiation indicators fully comply with national standards. It supports Dynamic MIMO Power Saving Mode (DMPS) and Automatic Power Saving Delivery (APSD), intelligently identifies the actual performance requirements of the terminal, rationally allocates the terminal sleep queue, and dynamically adjusts the bidirectional power between the AP and the client to reduce device energy consumption.
■ Construction is simpler
When connecting to a long-distance network, use a wireless bridge to save the need to dig trenches and bury cables. The engineering installation is fast and flexible. The wireless method is very simple and low-cost. No investment is required - the equipment can be relocated and reused.
■ Simple installation and maintenance
Support 24V POE power supply, convenient installation and deployment, simplify the construction, safe and reliable.
Main control plan |
AR9344 |
||||
DRAM |
DDR2 64MByte |
||||
FLASH |
8MByte |
||||
Cable interface |
10/100Mbps LAN*2 |
||||
Data rate |
11a:54M,48M,36M,24M,18M,12M,9M,6Mbps |
||||
11n:7.2M,14.4M,21.7M,28.9M,43.3M,57.8M,65M,72.2M,14.4M, 28.9M,43.3M,57.8M,86.7M,115.6M,130M,144.4Mbps |
|||||
Transmission mode |
Direct sequence amplification(DSSS) |
||||
Modulation mode |
OFDM/BPSK/QPSK/CCK/DQPSK/DBPSK |
||||
Standard |
IEEE802.11n,IEEE802.11a ,IEEE802.3u |
||||
Support agreement |
CSMA/CA,TCP/IP,IPX/SPX,NetBEUI,DHCP,NDIS3,NDIS4,NDIS5 |
||||
Frequency range |
4900~6100MHz |
||||
Power consumption
|
≤3W |
||||
Power source design |
POE 24V 1A (Default) (maximum voltage: 24V) |
||||
RF Power @25℃±2dB |
802.11a |
6-24Mbps |
23±2dBm |
||
36-48Mbps |
21±2dBm |
||||
54Mbps |
20±2dBm |
||||
802.11n |
HT20 |
MCS 0-3 |
23±2dBm |
||
MCS 4 |
21±2dBm |
||||
MCS 5 |
20±2dBm |
||||
MCS 6 |
20±2dBm |
||||
MCS 7 |
19±2dBm |
||||
HT40 |
MCS 0-3 |
21±2dBm |
|||
MCS 4 |
21±2dBm |
||||
MCS 5 |
20±2dBm |
||||
MCS 6 |
19±2dBm |
||||
MCS 7 |
18±2dBm |
||||
Sensitivity |
802.11a |
6Mbps ≤ 92dBm ; 54Mbps ≤ -76dBm |
|||
802.11n |
HT20 |
MCS 0 ≤ -86; MCS 7 ≤ -68dBm |
|||
HT40 |
MCS 0 ≤ -83dBm; MCS 7 ≤ -65dBm |
||||
Antenna system |
Frequency range |
5180~5825MHz |
|||
Direction of polarization |
Vertical (horizontal 60° / vertical 30°) |
||||
Gain |
14DBi |
||||
Manage |
Based on the WEP management |
Support |
|||
Telnet |
Support |
||||
Serial |
Support |
||||
Safety |
The MAC address control |
Support |
|||
Encryption |
WEP encrypt 64/128bits,WPA,WPA2,802.1x |
||||
Working / storage environment |
working temperature |
-30~65℃ |
|||
Storage temperature |
0~40℃ |
||||
Humidity (non-concentrated) |
≤95%(Non-condensation) |
1、A Schematic diagram of the point-to-point connection:
2、Schematic of point-to-multiple connections: